Tel:+86-21-51078970
The Stingray 63QS offers the most cost-effective and compact solution on the market for 8-up imposed film production. With its low entry price point for high-quality imaging, full A1 format and automated punching, the Stingray 63QS is the natural selection for commercial printers with 8-up press capability, or with plans to move to larger format presses.
Stingray® 63QS imagesetters give you the power to respond to customer expectations for higher quality and greater productivity.
Maximum Recording Width
25.0" (635 mm)
Recording source
One 10 mW visible red laser diode (670 nm recording wavelength)
Resolutions
12 resolutions from 1000 dpi to 3556 dpi (394 dpcm to 1400 dpcm)
Maximum Line Screen
200 Ipi (78.7 Ipcm)
Recording Speeds
1000 dpi - 32.00"/min, 81.28 cm/min
1016 dpi - 31.50"/min, 80.00 cm/min
1200 dpi - 26.67"/min, 67.73 cm/min
1270 dpi - 25.20"/min, 64.00 cm/min
1446 dpi - 22.13"/min, 56.21 cm/min
1524 dpi - 21.00"/min, 53.33 cm/min
1800 dpi - 17.78"/min, 45.16 cm/min
2032 dpi - 15.75"/min, 40.00 cm/min
2400 dpi - 13.33"/min, 33.87 cm/min
2540 dpi - 12.60"/min, 32.00 cm/min
3048 dpi - 8.47"/min, 21.51 cm/min
3556 dpi - 6.43"/min, 16.33 cm/min
Repeatability
0.001" (0.025 mm) typical over six consecutive 20" x 28" (51 x 71 cm) separations on film. May vary according to media, media packaging and processing conditions.
Media Types
Visible red sensitive film, polyester plate or paper material
Media Thickness
0.004" to 0.008" (0.1 to 0.2 mm)
Configuration
Emulsion in, 2" (50 mm) diameter core, breakaway taped to core.
Cassette Capacity
Up to 400' (120 m) of 0.004" material 5.7" (145 mm) maximum roll diameter
Media Widths
25.0" (635 mm)
24.6" (625 mm)
24.0" (610 mm)
23.5" (597 mm)
23.0" (584 mm)
22.5" (572 mm)
22.0" (560 mm)
21.7" (551 mm)
21.6" (549 mm)
20.9" (530 mm)
20.5" (521 mm)
20.1" (510 mm)
20.0" (508 mm)
19.6" (498 mm)
18.6" (472 mm)
18.2" (462 mm)
18.1" (460 mm)
18.0" (457 mm)
17.7" (450 mm)
16.0" (406 mm)
14.0" (356 mm)
Processing
Online processing required. Processor interface and buffer included as standard.
Registration punching
Choice of one of eight industry standard head and tail configurations or custom (up to 5 punches per head and tail)
Dimensions
39.0"W x 35"D x 44"H
(99 cm x 89 cm x 112 cm)
Weight
810 Ibs (368 kg)
Heat Dissipation
1500 BTU/hour maximum
Power Requirements
100/115/230 V (± 10%);
1.7/1.5/1.0 amps;
50/60 Hz, single phase
Operating conditions
62°F - 86°F; 17°C - 30°C relative humidity 45-65% non-condensing. Relative humidity outside of this range may affect imagesetter performance.
